|
|
 |
|
| |
|
Stroboscope
(Analogue / Digital) |
|
[Section - Yarn] |
|
|
 |
| |
|
|
 |
Technical Specifications : |
|
| |
Stroboscope is source of flashing light, that can be synchronized with any fast, repeating motion so as to make the moving device appear stationary or moving slowly. The two main applications of Stroboscope are R.P.M. measurement and slow motion study. In industry, the main use of Stroboscope is R.P.M. measurement of revolving machinery such as motors, fans, blowers, textile machine spindles etc.The instrument has ON/OFF switch, Range switch |
|
|
|
|
|
|
|
|
|
|
|
Range switch and Flash Control Knob in the centre. Connect the instrument to 230 Volts A.C. mains (Model 1100) or 12 Volts Battery Pack / Mains Adapter (Model 2100). If speed of revolving object is not known, then select high flashing rate by pressing the RANGE switch in down position and keeping the flash control knob in extreme clockwise position, go on reducing the flashing rate. Multiple images of marking on the revolving shafts will be observed. Further reduce the flash rate till single stationary image of the mark is obtained. The first single image occurs, when flashing rate is obtained. The first single image occurs, when flashing rate is equal to RPM of revolving object. This RPM can be read on the Dial, which is calibrated in terms of RPM. In case, single image is not obtained in the higher range, then release the RANGE switch to upper position and obtain the single image. |
|
|
The Stroboscope comes in various Models viz |
 |
Mains operated Xenon Flash Stroboscope |
|
ANALOGUE, Range : 150 – 18000RPM. |
|
|
Mains operated Xenon Flash Stroboscope |
|
DIGITAL, Range : 250 – 18000RPM. |
|
|
Battery/Mains operated Xenon Flash Stroboscope |
|
DIGITAL, Range : 250 – 18000RPM. |
|
|
Battery/Mains operated Xenon Flash Stroboscope |
|
DIGITAL, Range : 250 – 30000RPM. |
|
|
|
|
|
|
|
