Section - Fibre
Section - Yarn
Section - Fabric
 
     
     
 
 
Manufacturers & Exporters of High Technology & High Quality Textiles Testing Machines
 
 

Fabric Thickness Guage

[Section - Fabric]

Technical Specifications

Technical Data

Related Standards

   
Technical Specifications :  
 

Accurate determination of thickness of Fabric/Yarn is considerable importance, both for assuring conformity with design parameters and for evaluation of various physical properties. Determination of thickness of Fabric/Yarn in laboratory is usually carried out with the help of Bench Thickness Guage. The Fabric/Yarn component whose thickness is to be determined is kept on a flat anvil and a

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

circular indenter is pressed onto it from the top under a specified pressure. The contact faces of the anvil and theindenter are ground flat and set in planes parallel to each other.
The “HIROSHIMA” Bench Thickness Guage for Fabric/Yarn consists of a dial micrometer fitted on a rigid metallic frame. The micrometer has a flat circular indenter which exerts the specified pressure on the Fabric/Yarn sample those thickness is being measured through a dead weight. The Fabric/Yarn sample is kept on an anvil which is in form of a flat circular platform. The axis of the indenter and the anvil coincide and is the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the rubber sample with the help of a lifting lever.

Technical Data :
  Range of measurement :  0 –10 mm / 25 / 1.0 mm
  Least count of dial guage :  0.01 mm / 0.01 /  0.001 mm
  Diameter of anvil :  50 mm approximately
  Diameter of indenter :  10 mm  or  28.7mm
  Load of indenter :  0.5, 0.62 or 1.0 psi
  Throat depth :  50 mm

Related Standards :

ASTM D-1777.          

  Top
 

|
 

@ 2010 Apex Enterprises